Rig # 22 Inventory
Draw Works 6,000 feet Rated
Drawworks:
National T-20 Single Drum Drawworks powered by 500 HP Series 60 Detroit Diesel, Drum grooved for 1 1/8” line, Foster makeup & breakout catheads, air drillers controls.
Derrick:
2007 model 99 feet , 300,000 lb, P.J. Jackknife Derrick, PJ Crown Sheaves, 4” 4000 psi standpipe, racking board, and ladder.
Substructure:
Available upon request. (10’ box sub)
Powered Pumps:
#1 Emsco 700 Duplex, 8” by 16” 700 HP max at 75 spm. forged steel fluid end w/ quick-change caps, relief valve, pressure gauge, master skid, powered by 750HP Cat with air clutch. Normally stocked with 6 1/2” liners.
Dog House & Fuel Tank Skid:
Dog House: 8’ width x 42’ length skid mounted, insulated doghouse with knowledge box, lockers, G.H. Bear automatic driller, Electric heat.
Fuel Tank: 3,000 gallon diesel fuel tank mounted on skid with dog house
Water Tank:
125 bbl, 7’ 1” width x 10’ 1” length x 15‘ 2” height water tank mounted on pipe tub
Generator Set:
35 kw light plant power by 4 cylinder Cat diesel.
Recording & Monitoring Equipment: Recording & Monitoring Equipment: Rig equipped with PASON Electronic Drilling Recorder (EDR) Includes: Doghouse touch screen computer, Rig Site Server, Rig Management PC workstation, IADC approved Pason electronic work station, contractor morning report, Access to Pason Data Hub with drilling date a minimum twice daily, and commercial grade satellite dish receiver/transmitter.
Handling Tools & Auxiliary Tools:
BJ Style Type C tongs with heads sizes from 3 ½” to 10 3/4”.
4 ½” Drill Pipe slips
5 ½” through 7” Drill Collar slips
Drill Collar Safety Clamp
Elevators: 4 ½” BN, 4 ½” casing, 5 ½” casing, 8 5/8” casing
Cat head & Boom line, both with 1” rope
Martin Decker Clipper Weight Indicator
4” ID Rotary Hose
1 Center Tub with 10 foot casing extension,
4 Pipe Tubs
Sure Shot deviation tool with wire line unit
Rotating & Traveling Equipment:
Gardner Denver 17 ½” Rotary Table
TSM 150 Swivel
4 ¼” square Kelly 37.10 feet overall length, 35.75 working length
Varco square drive Kelly drive bushings
Rat Hole and Stand pipe on Driller Side
150 ton, 8 line hydra hook traveling blocks
1 1/8” Drill Line
2 3/8” X 96” Elevator Links
Drill Pipe & Drill Collars:
14 each 6 ½” 96 #/ft 4 ½” XH Thread, HB, Slip Recessed Drill Collars (6 1/2” OD, 2 ¼” ID)(New July 2007)
5000 feet of 4 ½” 16.6 #/ft Grade E Drill Pipe with 4 ½” XH HB BN tool joints
Change Over Subs with Rig:
1 each Bell Sub 6 5/8 Regular box by 4 ½” XH Pin, 26” long, 8” OD top, 6 ¼” OD Bottom
1 each 4 ½” XH Box by 4 ½” Regular Box with float cut out